|
|
|||||||||||||||||
常州廠房滑升門，常州廠房改造提升門
一、常州廠房滑升門的基本控制結構：
1.門板系統
雙面 0.45mm厚橫向凹凸條紋幼稚鋼板，內部填充高密度聚氨酯發泡（約45KG/㎡，不含CFC）,堅固耐用，保溫隔音，工業美感強。
2. 平衡系統
由進口高強彈簧系統保持平衡，表面均經電鍍抗腐蝕性處理，實現30，000循環周期。加強型聯軸器配合鋼軸更穩固。配備可調節式鉸鏈與加強型軌道。
2.密封系統
頂部和雙側軌道裝配三元乙丙密封帶及¤型底部密封，關門后實現四全密封。門板連接處裝有密封橡膠隔斷冷熱傳遞，減少熱損失。
4.傳動系統
高質量控制系統與電動開門機，可定制變頻智能系統。預留多個埠，滿足互鎖聯動和遠程控制等定制需要。金屬和尼龍材質多種滑輪。
5.安全系統
扭簧意外斷裂時，保護裝置會迅速反應，將下落的門體強制在20cm范圍內停止。纜繩斷裂保護裝置滑升纜繩斷裂門體下落。可選遇阻反彈的底部安全防夾裝置。
6.增強系統
可視配窗口、門中門、提升方式、抗風組件、遙控、遠程控制、門板定制顏色、紅外線安全保護以多種感應開門裝置。
二、提升門英文簡介：
The industry sectional door is also named electric sliding up door. It is suitable for every building’s outside and inside installation. It is beautiful, high-intensity, reliable, stable, low noise, airtight, and constant temperature, it also takes low construction rate in workshops’ space and improves the production efficiency. So it is widely used in medical, food industry, electronic, machinery, supermarket and other workshops which need high cleanliness because of its low installation conditions and high practicability. There is a manual-electric exchange device on the door opener, when the electricity is cut off, the manual device will be turned on. The airbag in the bottom will be bounced off when it hit a barrier. It is insurance. Light window, door in door, controller are all can be added is the industry sectional door. There is an interlock between the two doors (door in door), when the small door open, the switch will be cut off and the control power will also be cut off. And the big door can’t move any more to ensure the security.
三、拜宜門業近期的工程案列：
1.中國南車集團
2.遼寧忠旺鋁業
3.中糧集團
4.中國郵政
5.康師傅，統一食品
6.上海艾仕德涂料系統
7.法國歐尚超市
8.ABB電機工廠
9.奔馳4S店等
常州廠房滑升門，常州廠房改造提升門
|
